dusty550
08-13-2005, 10:14 PM
I just finished building a new computer, With a PCI express videocard, Powered it up and the display doesnt come on, Its only 1 PCI videocard, Their was an Ez-Plug thing on the motherboard, but i looked in the manual and it said if you uses 2 VGA cards which i dont. What would be the problem, everything else powers up fine.
The System is brand new, just got all the parts today, Its a 485 Watt PSU. Its an Asus EN6600 Silencer 256 mb PCI-EXPRESS. The motherboard is an Asus p5wd2 premium, and the case i dont think has a internal speaker (for the beeping). When it was being put together, their was this white plug, that was 8 pins if you removed a cover on one half, but i only had a 4 and 6 pin connectors from the PSU so i just plugged back in the cap and put in the 4 pin.
The System is brand new, just got all the parts today, Its a 485 Watt PSU. Its an Asus EN6600 Silencer 256 mb PCI-EXPRESS. The motherboard is an Asus p5wd2 premium, and the case i dont think has a internal speaker (for the beeping). When it was being put together, their was this white plug, that was 8 pins if you removed a cover on one half, but i only had a 4 and 6 pin connectors from the PSU so i just plugged back in the cap and put in the 4 pin.