Question-Heatsink on mobo came off need help to find out how to put back on

[Fyshawk]

I have a motherboard that has a heat sink on the chip on the board but it fell off I was wondering what i would use to put it back on there is no holes in board to place a bracket on it so i need to know what I would use to put it back on thanks for your help in adavance

[mander]

What motherboard is it? Before we can help, we will need to find a motherboard manual somewhere which explains what it looks like and how the fan is assembled.

[Ken_ver_1_5]

if its not the cpu it could be the northbrige chip I have found some are clipped
and some are glued on. http://www.arcticsilver.com/adhesive_instructions.htm

[Fyshawk]

Motherboard (http://www.intel.com/design/motherbd/rc/index.htm) The motherboard is Make Intel Desktop D865GBF/D865PERC

I am also putting a p4 1.6 in the board and some one told me it should not matter to much if that was the only cpu i was putting in it

[mander]

Not sure if this helps anyone figure it out.

Support for an Intel® Pentium® 4 processor in an mPGA478 socket with a
400/533/800 MHz system bus
• Support for an Intel® Celeron® processor in an mPGA478 socket with a
400 MHz system bus

[Fyshawk]

got it fixed picked up some of this http://www.bigfootcomputers.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=2309CGTC&Category_Code=200
and everything is up and running fine thanks for the help