View Full Version : "Building DMI Pool ."
ppiggppenn
08-17-2005, 12:57 AM
I'm getting a normal POST until after the PCI Device listing, where it announces (title) and stops. I've wiped(with JPs) the BIOS back to 1Jan2000, disconnected all devices, swapped the RAM, with no change. Next is trash Mobo?
http://www.computerhope.com/issues/ch000474.htm
http://www.duxcw.com/faq/computer/dmi.html
Check temperatures and voltages, clean processor heatsink, verify BIOS settings, and test system with a different power supply + video card.
Pull out every PCI card and drive, then try again.
ppiggppenn
08-17-2005, 02:27 AM
did all of the above, same result, ....cleared BIOS again, checked the links (thanks AMD) and did all those resets eg enabled "Reset Configuration Data" in PnP/PCI Cfgs, ...with nothing connected and Fail-Safe Defaults loaded still giving same result, I'm looking at that Mobo again, a P III 733 MHz anyways
Powered by vBulletin® Version 4.1.7 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.